Cement Grout Mix Design With Fosroc Cebex 100 Admixture and OPC 43 Cement
Cement grout is a
mixture of cement, water, with or without aggregate and with or without
admixture.
Cement grout is used for crack repairing, filling the voids of Post-Tensioned cable in prestressed concrete bridges etc.
STIPULATIONS FOR PROPORTIONONG
|
Type
of Mix |
:
Cement Grout |
|
Type
of Cement |
:
OPC-43 |
|
Maximum
water cement Ratio |
:
0.45 (As Per MORT&H 5th Rev. Appendices-1800/III |
|
Degree
of supervision |
:
Good |
|
Admixture |
:
Fosroc Cebex 100 |
|
MATERIAL |
DESCRIPTION |
SOURCE |
BATCH NO/WEEK NO |
|
Cement |
OPC-43 |
Ramco cement |
40/2018 |
|
Water |
- |
Bore Water |
- |
|
Admixture |
Cebex 100 |
Fosroc Chemicals (India) Pvt.Ltd. |
IN1MF00407003K |
SELECTION OF WATER-CEMENT RATIO
As per Admixture recommended Dosage,
adopted water-cement ratio = 0.41 ≤0.45 (As Per
MORT&H 5th Rev. Appendices-1800/III Clg.4.1)
|
OPC |
Concreting
Sand |
Water |
Cebex 100 |
Approx. Yield |
|
50 Kg |
- |
20-22 litres |
225 gm |
36 litres |
|
50 kg |
50 kg |
22-24 litres |
225 gm |
57 litres |
|
Note:
For grout, mortar or concrete mixes with an aggregate/cement ratio more than
1, 4 x 225 g units of Cebex 100 per 100 kg of cement, shall be used. |
||||
DESIGN CALCULATION
|
Cement Content |
: |
50 |
kg |
W/C = 0.41 Then, Water = 0.41 x Cement |
|
Water-Cement ratio |
: |
0.41 |
|
|
|
Water Content |
: |
20.50 |
kg |
|
|
Admixture Quantity |
: |
0.225 |
kg |
MIX PROPOTIONS FOR TRIAL
|
Cement Content |
: |
15 |
kg |
|
Water-Cement ratio |
: |
0.41 |
|
|
Water Content |
: |
6.150 |
kg |
|
Admixture Quantity |
: |
67.50 |
gm |
TRIAL MIX OBSERVATION
No of
Cube Casted= 9 nos
1. Bleeding = Not Found (Not exceed 0.3% of vol. of the initial
vol. of grout As Per MORT&H 5th Rev.
Appendices-1800/III Clg.4.2)
2. Initial
Setting Time = 10 Hours (More than 3 hours
& less than 12 hours As Per MORT&H 5th Rev. Appendices-1800/III Clg.4.2)
3. Final
Setting Time = 25 Hours (Not less than 24 hours As Per MORT&H 5th Rev.
Appendices-1800/III Clg.4.2)
4. Volume
Change = 3.7 % (1% to 5% As Per MORT&H 5th Rev. Appendices-1800/III Clg.4.2)
5. 7
Days Compressive Strength = 27.54 N/mm2 (Not less than 27 N/mm2 As Per MORT&H 5th Rev.
Appendices-1800/III Clg.4.2)
6. 28
Days Compressive Strength = 36.66 N/mm2 (Not less than 30 N/mm2 As Per MORT&H 5th Rev.
Appendices-1800/III Clg.4.2)
************ The End**********
You have shared a lot of information in this article. I would like to express my gratitude to everyone who contributed to this useful article. Keep posting. automatic auger fillers
ReplyDeleteThis is excellent information which is shared by you. This information is meaningful and magnificent for us to increase our knowledge about it. Keep sharing this kind of information. Thank you. al madina cement products
ReplyDeleteI just need to say this is a well-informed article which you have shared here about Asphalt Paving Companies in Toledo. It is an engaging and gainful article for us. Continue imparting this sort of info, Thanks to you.
ReplyDeleteThank you so much for the article. Awesome.
ReplyDeleteCoast Plastering
After a long time, I read a very beautiful and very important article that I enjoyed reading. I have found that this article has many important points. Thanks .pls visit our website Concrete contractors San Antonio
ReplyDeleteVery interesting and amazing article about foundation repair san antonio. I will surely share it with friends. Thanks for sharing.
ReplyDeleteIt is a proficient article that you have shared here.Residential Metal Roofing Contractors Near Me I got some different kind of information from your article which I will be sharing with my friends who need this info. Thankful to you for sharing an article like this.
ReplyDeleteYou have done good work by publishing this article here about Boardwalk Concrete. I found this article too much informative, and also it is beneficial to enhance our knowledge. Grateful to you for sharing an article like this.
ReplyDeleteI’m genuinely impressed with your knowledge. You have shared good knowledge by this blog. It was a really attractive blog. Please keep sharing your post with us. Concrete contractors San Antonio
ReplyDeleteI generally check this kind of blog and I found your blog which is related to my interest. Genuinely, it is good and instructive blog about metal roofing cedar city utah Thanks for sharing an amazing blog here.
ReplyDeleteI really appreciate your work which you have shared here about the ------. The article you have shared here is very informative and the points you have mentioned are very helpful. Thank you so much.paver cleaning Hinsdale
ReplyDeleteYou've written an excellent post, and you've shared it with us. Your article provided me with some unique and useful knowledge. I appreciate you sharing this text with us. commercial gutters
ReplyDeleteHello! I want to say that this article is amazing, appreciation from columbus concrete contractors
ReplyDeleteThis article provides a comprehensive guide for proportioning and designing cement grout for various applications such as crack repairing and filling voids in prestressed concrete bridges. The article outlines the materials required for making cement grout and provides details on their sources and batch numbers. It also includes stipulations for proportioning, such as the type of mix, type of cement, maximum water-cement ratio, degree of supervision, and admixture to be used. The article goes on to explain the selection of water-cement ratio based on the recommended dosage of admixture and design calculations for determining the cement content, water content, water-cement ratio, and admixture quantity. Furthermore, the article presents the mix proportions for trial and the observations made during the trial. Please discuss some other topics like "steel suppliers in Chennai".
ReplyDeleteThis article provides detailed information about cement grout, including its composition and applications, as well as the stipulations for proportioning and design calculations. The use of Fosroc Cebex 100 admixture is also mentioned, along with its recommended dosage for different types of concrete mixes. The article concludes with a trial mix observation that confirms the effectiveness of the recommended mix proportions. Overall, this article is a useful resource for construction companies in Chennai and beyond, as it provides detailed information on an important aspect of construction that is often overlooked. It underscores the importance of following stipulated guidelines and adopting best practices to ensure the quality and durability of the construction projects.
ReplyDeleteThis page offers a thorough reference for calculating cement grout proportions and designs for a variety of uses, including patching cracks and voids in prestressed concrete bridges. The page includes information on the ingredients needed to make cement grout, including information on their origins and batch numbers. It also specifies the type of mix, type of cement, maximum water-cement ratio, level of supervision, and additive to be used for proportioning. The article continues by outlining how to choose a water-cement ratio based on the dose of admixture that is advised as well as design calculations for figuring out cement content, water content, water-cement ratio, and admixture quantity. The trial mix proportions are presented in the article along with the trial's observations. Please bring up additional subjects, such as "Metal Roofing In Chennai".
ReplyDeleteThis page provides a comprehensive reference for figuring out cement grout proportions and designs for a number of applications, such as filling in gaps and cracks in prestressed concrete bridges. The article provides details on the components required to create cement grout, such as their sources and batch numbers. Additionally, it specifies the kind of mixture to use, the kind of cement to use, the maximum water-to-cement ratio, the level of supervision, and the proportioning additive. The remainder of the page describes design calculations for determining cement content, water content, water-cement ratio, and admixture quantity as well as how to determine a water-cement ratio based on the recommended dose of admixture. Please raise further issues, like "PEB steel structures".
ReplyDeleteThank you for sharing this blog, Among the numerous options in Chennai, Peb Companies In Chennai reign supreme in the steel building industry. These companies specialize in Pre-Engineered Buildings (PEB), offering unmatched expertise and excellence. When it comes to quality, durability, and cost-effectiveness, they are the top choice for various construction needs. Trust the best-in-class PEB solutions from these companies in Chennai to meet your structural requirements with unparalleled precision and reliability.
ReplyDeleteI always check this type of advisory post and I found your article which is related to my interest.liquid filling packaging solutions This is a great way to increase knowledge for us. Thanks for sharing an article like this.
ReplyDeleteTARMAC | TAR & CHIP | RESIN | BLOCK PAVING DRIVEWAYS IN WHITSTABLE"This is very helpful and interesting, thanks for sharing! The breakdown of materials and proportions for the cement grout mix is very useful. The results from the trial mix, especially the compressive strength, highlight the effectiveness of the design."
ReplyDeleteMarch Driveways Very informative, thanks for sharing! The adherence to MORT&H standards and the trial results are particularly useful for understanding the effectiveness of the mix design.
ReplyDeleteThank you for sharing this informative article. Provide best knowledge about Mild Steel Pipe. We offer best quality of Apollo Pipes at best price. Checkout here.
ReplyDelete